Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
The Tether by ZERO® is a safe secure diversionary anchor point for metal roofing applications. The Tether is designed as a diversionary anchorage point for total restraint application. The device gives the operator a 360 degree unhindered working area up to the roof edge whilst retaining a restraint position.
The Tether can be used on metal clad roofs fixing directly to the metal surface with a minimum of x3 recommended roof screws and can also be used on trim deck roofs.
Provided that instructions are followed (minimum of 3 roof screws), a rating of 15kN is detailed
AS/NZS 1891.4:3:2007 Anchorages, (a)Single point anchorages - Limited free fall-arrest, Restraint technique
The Tether by ZERO® is a safe secure diversionary anchor point for metal roofing applications. The Tether is designed as a diversionary anchorage point for total restraint application. The device gives the operator a 360 degree unhindered working area up to the roof edge whilst retaining a restraint position.
The Tether can be used on metal clad roofs fixing directly to the metal surface with a minimum of x3 recommended roof screws and can also be used on trim deck roofs.
Provided that instructions are followed (minimum of 3 roof screws), a rating of 15kN is detailed
AS/NZS 1891.4:3:2007 Anchorages, (a)Single point anchorages - Limited free fall-arrest, Restraint technique