Petzl "ASAP" 20 Fall Arrestor Kit
Mobile fall arrester for rope
With its unique locking system, the ASAP sets the standard in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the ASAP locks on the rope and stops the user. Depending on the intended use, the ASAP may also be combined with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber to work at a distance from the rope. This advert is for the ASAP with a 20cm attachment.
Description
Constant fall protection:
- arrests falls, slides, and uncontrolled descents
- works on vertical or angled rope
- locks on the rope even if grabbed during the fallSimple to use, and effective:
- moves up or down the rope, without any manual operation
- easy to install and remove at any point on the rope
- may be combined with an energy absorber to work at a distance from the rope: ASAP’SORBER or ASAP’SORBER AXESS. The latter can be used for loads of up to 250 kg in two-person rescue situationsCertified to European and Russian standards when used with an OK TRIACT-LOCK carabiner
Certified to American standards when used with a Bm’D or OXAN TRIACT-LOCK (international version) carabiner
Specifications
Material(s): aluminum, stainless steel
Weight: 295 g
Certification(s): CE EN 12841 type A, UKCA, when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): CE EN 353-2, UKCA, GB/T 24537-2009, when used with an OK TRIACT-LOCK carabiner and an ASAP’AXIS 11 mm rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): EAC when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 11 mm static rope with sewn termination
Certification(s): XF 494-2004: FZL-Z-Q10/13
Mobile fall arrester for rope
With its unique locking system, the ASAP sets the standard in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the ASAP locks on the rope and stops the user. Depending on the intended use, the ASAP may also be combined with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber to work at a distance from the rope. This advert is for the ASAP with a 20cm attachment.
Description
Constant fall protection:
- arrests falls, slides, and uncontrolled descents
- works on vertical or angled rope
- locks on the rope even if grabbed during the fallSimple to use, and effective:
- moves up or down the rope, without any manual operation
- easy to install and remove at any point on the rope
- may be combined with an energy absorber to work at a distance from the rope: ASAP’SORBER or ASAP’SORBER AXESS. The latter can be used for loads of up to 250 kg in two-person rescue situationsCertified to European and Russian standards when used with an OK TRIACT-LOCK carabiner
Certified to American standards when used with a Bm’D or OXAN TRIACT-LOCK (international version) carabiner
Specifications
Material(s): aluminum, stainless steel
Weight: 295 g
Certification(s): CE EN 12841 type A, UKCA, when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): CE EN 353-2, UKCA, GB/T 24537-2009, when used with an OK TRIACT-LOCK carabiner and an ASAP’AXIS 11 mm rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): EAC when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 11 mm static rope with sewn termination
Certification(s): XF 494-2004: FZL-Z-Q10/13
Mobile fall arrester for rope
With its unique locking system, the ASAP sets the standard in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the ASAP locks on the rope and stops the user. Depending on the intended use, the ASAP may also be combined with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber to work at a distance from the rope. This advert is for the ASAP with a 20cm attachment.
Description
Constant fall protection:
- arrests falls, slides, and uncontrolled descents
- works on vertical or angled rope
- locks on the rope even if grabbed during the fallSimple to use, and effective:
- moves up or down the rope, without any manual operation
- easy to install and remove at any point on the rope
- may be combined with an energy absorber to work at a distance from the rope: ASAP’SORBER or ASAP’SORBER AXESS. The latter can be used for loads of up to 250 kg in two-person rescue situationsCertified to European and Russian standards when used with an OK TRIACT-LOCK carabiner
Certified to American standards when used with a Bm’D or OXAN TRIACT-LOCK (international version) carabiner
Specifications
Material(s): aluminum, stainless steel
Weight: 295 g
Certification(s): CE EN 12841 type A, UKCA, when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): CE EN 353-2, UKCA, GB/T 24537-2009, when used with an OK TRIACT-LOCK carabiner and an ASAP’AXIS 11 mm rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): EAC when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed
Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 11 mm static rope with sewn termination
Certification(s): XF 494-2004: FZL-Z-Q10/13